- Senses 50 to 100
locations wirelessly and lets you monitor/log: a collective
telemetering system.
- Wiring is very minimal because it's wireless. Layout change is also
easy.
- Remote sensing reduces routine maintenance manpower cost.
- Tempeature, Light, Humidity (ref only), analog DC voltage etc.
Digital input can be consulted.
- Location change is easy: Reduces cost.
- Radio range 30m to 150m between each node (node data multi hops, so
the actual range is a multiple)
- made by Sumitomo Precision under the license of Crossbow Technology.
Typical application: temperature monitor for food/pharma warehouse,
Temp and electricity monitor for energy, factory maintenance (e.g.
monitoring motor temperatures), data-centre/server-room.
Over 30000 pcs have been produced, working in supermarkets for
Energy and CO2 reduction system, automobile factory, etc.
Features
- Reliable communication: Each node
Automatically selects best hopping route to the base station, dependent
on radio propagation.
- World-class wireless sensor network technology
- Already deployed in energy, maintenance, logistics fields.
- Has FCC and ARIB certifications.
See photo on the right:
1) put batteries inside (lasts upto 6 month with 6 x AA)
2) turn the power on
3) place it everywhere you like
4) connect the base station
Now you can browse sensor values by Internet Explorer or Google-Chrome!
Sensor value charts, Topology, etc.
|
|
neoKIT-J Components:
(individual pcs also available)
|
1)
air Temp/Light sensor node @JY36000
|
2
|
72000
|
2)
temp sensor node (4 input channels) for PT100 RTD temp probe
@JY25000
|
1
|
25000
|
3)
PT100 RTD temp sensor probe (a set of two)
|
2
|
6900
|
4)
Voltage sensor node (4 input channels) for 0 to 2.5Vdc sensing from any
such sensor of yours. @JY25000 |
1
|
25000
|
5)
Base node @JY45000
|
1
|
45000
|
6)
Base mini server (for LAN or Internet connection) NB100 @JY80000
|
1
|
80000
|
7)
Maintenance node (lets you change sensing intervals, monitor radio
strength, etc.) @JY15000
|
1
|
15000
|
8)
USB interface MIB520 etc for (7) @JY18500
|
1
|
18500
|
9)
CD-ROM (not shown)
|
2
|
84100
|
10)
Connection cable for (4) @JY3500 for a set of 4 cables (not shown)
|
4
|
3500
|
neoKIT Price FOB Japan |
JY375,000 |
What
you can do with this set:
|
|
Combinations
other than above can be quoted. For example, if you would like to
just monitor air environment temperature at different locations, only the nodes of type
(1) can be quoted without other types of nodes - Customizing the kit
combination to your needs: let us know. (7), (8), and (9) are useful to
have, although not absolutely necessary (lets you change sensing
intervals, monitor radio strength, etc)
|
|
|
|
|
neoKIT-J Common
Spec
|
MPU
|
Atmel
AVR 8bit RISC core
|
8MHz
|
Modulation
|
O-QPSK
|
G1E
|
Radio
|
IEEE
802.15.4
|
ZigBee's
Phy Layer
|
Radio
frequency
|
2405
to 2480MHz
|
15
channels (ea chn occupies 3 MHz bandwidth)
Wifi interference is minimal
|
Transmission
power
|
0dBm
|
Max
200m, typ 50m between nodes
|
sensing
interval
|
1
min by default
|
use
maintenance node to change (1sec - 60 min)
|
Current
dissipation(LP mode)
|
300
to 500uA without sensors
|
3Vdc
(AA cell x 6 or 3, or use AC adaptor
|
Dimensions
/ weight
|
219
x 97 x 24 mm 220gr |
batt
not incl
|
Produced
|
Japan
|
Sumitomo
Precision
|
PT100* and
Voltage** nodes
|
input
channels per node
|
4
ch
|
|
*temp
probe PT100 RTD
|
-30
to
+70 C
|
Resolution
0.01, Kit has two probes=2ch, (wire=2m) Higher temp upon request. e.g.
Use for fridge.
|
**Voltage
input
|
0
to 2.5Vdc
|
AD16bit
KIT has four 1m cables =4ch
|
Temp/ Light
Environment sensor node (on board)
|
Temp
range
|
-10
to
+45 C
|
Resolution
0.01C
|
Humidity
|
Reference
only upto 80%
|
|
Light
|
0
to 10000
Lx
|
Resolution
2%
|
***Dependent on situaion.
Data multi-hops (relays) between nodes, therefore the actual range from
the farthest node to the base station can be multiple of this value.
Crossbow MPR, XM, BU,SN,
EN, TPR, IPR are not compatible to the above products.
|
Crossbow Japan, Ltd.
a joint venture of
Sumitomo Precision Products and Crossbow Technology
Sumitomo Precision
Products building
1-10 Fusocho, Amagasaki, Hyogo 660-0891Japan
tel
+81-6-6489-5922 fax +81-6-6489-5902 email: info (at) xbow.jp
www.xbow.jp
|
|
|
|
Trade marks belong to each
respective owner. PHotos may differ from actual product.s.
Specifications are subject to change without notice or obligation.
Unless otherwise a separate written contract exists individually, we
take no responsibility on support or software or revisions thereof.
Legal usage including but not limited to radio and electricity
are users responsibility under any circumstance. The use and
consequence of the product is at user's risk. Export permit may
be necessary for exports/re-exports. Vista compatibility has not been
tested. Any sensor has variances and is merely a transducer,
hence needs to be properly calibrated to make it a measurement
equipment. Personal computers are not included in the product, unless
specifically mentioned.. Copyright 2009 Crossbow Japan, Ltd. All rights
reserved.
|
|
|