Trifield Broadband Electromagnetic Field /
NATURAL ENERGY WORKS
Electrosmog Meter
MEASURING INSTRUMENTS
APPARATUS & UTILITIES
BOOKS & DVDs
MAKE YOUR WORLD BEAUTIFUL
COMPANY DETAILS & LINKS
Off-Site Links:
|
No State Sales Tax on your Purchases, Ever! Save from 3% to 10%!
Find out the levels of exposure in your home environment by accurately measuring the magnitude of the electric and magnetic fields which are present. The TRIFIELD BROADBAND METER is frequency weighted in order to gauge whether the electric current inside the body exceeds danger threshold levels. By reading the true magnitude of a field, the TRIFIELD BROADBAND METER can obtain an accurate reading at any point within a room. The TRIFIELD BROADBAND METER is a more sensitive version of the standard Trifield Meter more widely sold. For a slightly higher price, it detects over a wider range of frequencies.
The TRIFIELD BROADBAND METER combines magnetic, electric, and radio/microwave detectors all in one hand-held instrument, so a large portion of the entire non-ionizing electromagnetic pollution spectrum is covered, all for a truly economical price.
TRIFIELD BROADBAND with 60-cycle Calibration.
TRIFIELD BROADBAND METER, with 50-cycle Calibration.
If you do not live in the USA or Canada, and do not know which frequency is used in your electrical power system, please consult this chart: Find the "hot spots" in your home, office, or neighborhood: these can include poorly grounded internal wiring, computers, electric blankets and heaters, fluorescent lights and dimmers, high voltage transformers, radio broadcasting transmitters, cellular phones and microwave ovens. By measuring the "hot spots" you can move cribs and beds, improve grounding, or take other steps to avoid long- term exposure to high electromagnetic pollution levels. Note: This meter does not detect nuclear radiation. For that task, see our RadAlert and Inspector Nuclear Radiation Meters. Also, the Trifield Broadband is useful for making only rough determinations of RF and microwave exposures in the cell phone or cell phone tower frequencies. For that task, you should consider our Cell Phone & Tower RF Radiation Meter. Natural Energy Works also carries several excellent books on these subjects, here. PRODUCT DESCRIPTION: The selector knob has six positions: OFF, BATTERY TEST, LOW MAGNETIC field, HIGH MAGNETIC field, ELECTRIC field, and RADIO/MICROWAVE power density. The meter face is analog (needle type). A needle reading of one-third of full scale corresponds to either 1 milligauss, 3 milligauss, 3 kilovolts/meter, or 0.05 mW/cm2 respectively at the Low Magnetic (0-3 range), High magnetic (0-100 range), electric field, or radio/microwave settings. Long term personal exposure to levels higher than these should be avoided (based on present knowledge of electromagnetic pollution). Full scale deflection of the meter's analog dial registers detection limits at 3 milligauss, 100 milligauss, 100 kilovolts/meter, and 1 mW/cm2. The meter dial is labeled with a red bar above the one-third reading levels. The Low Magnetic (0-3 range) setting allows very low level magnetic field measurements, and reads 1 milligauss at one-third full scale. The Magnetic and Electric field selectors are calibrated for their respective 60-cycle or 50-cycle powerline frequencies, while the Radio/Microwave detector is calibrated for the peak frequencies of home microwave ovens, at 2 GHz, but will detect radio/microwaves across a frequency range encompassing 100 KHz to 2.5 GHz. Depending on where the knob is set, the meters detect either frequency-weighted magnetic fields (two separate scales), or frequency-weighted electric fields in the ELF and VLF range. It has significant sensitivity at 100,000 Hz, well past the 17,000 Hz horizontal scan of video displays. The radio/microwave setting can detect up to around three billion Hz (3 GHz), which lets you gauge radio-wave power, CB and cellular phone equipment, and many types of radars. The RADIO/MICROWAVE setting on the BROADBAND TRIFIELD METER is more senstive over a wider range of frequencies than the ordinary Trifield Meter which is more widely sold today at a only a slightly lower price, and the TRIFIELD BROADBAND designed as a more general electromagnetic measurement tool. It detects electric and magnetic fields from power line frequencies (50-60 Hz) up through around 3 GHz, which includes many harmonic frequencies. This fills in the gap from 100 KHz to 50 MHz, which includes many amateur radio frequencies so that antenna radiation patterns can be measured. The TRIFIELD BROADBAND METER detects powerline electric and magnetic fields and the most common frequencies used in microwave ovens plus a range of frequencies typical of AM/FM and CB/Ham radio broadcasting towers. Aside from this greater bandwidth sensitivity, the TRIFIELD BROADBAND METER is identical in size, weight, appearance and ease of use to the standard model and long-selling Trifield Meter. The TRIFIELD BROADBAND METER comes with a 9-volt transistor battery and booklet describing the operation and use of the meter in fuller detail. For more information on the hazards of low-level electromagnetism, review the various titles on these subjects in our "Electrosmog" book section. |
No State Sales Tax on your Purchases, Ever! Save from 3% to 10%!
Back to Catalog Front Page
Check Your Selections and Checkout
Be sure you have all desired items in your shopping cart.